ProDispenser
A smarter way to supplement through the water trough.
The stainless steel ProDispenser slowly releases a measured dose of LivestockIQ supplement into the trough over about 3 days, so every animal at the water point gets access as it drinks. No pumps, no power, no daily dosing.
Screws onto 5L, 10L and 20L DosingDrums.
For our year-round supplements, one 3-day application provides nutritional support for up to 6 weeks.
3 Days
to release one dose
~20%
Approx. air space in every drum
Up to 6
Weeks of support from one application
Measure. Connect. Dose. Repeat.
The recommended way to apply LivestockIQ supplements is through the water trough with the ProDispenser.
1
Measure
Work out the dose from your livestock numbers and the label dose rate, or the DoseIQ calculator. Example: 100 cows × 50mL = 5L.
2
Fill & connect
Pour the dose into a clean, empty DosingDrum, leaving approx. 20% air space. For small doses, top up with water for extra weight. Screw the ProDispenser on firmly.
3
Dose
Start with clean, cool water where possible. Drop the drum into the trough and it will self-right, with the ProDispenser fully under water. Let it float freely for about 3 days.
4
Repeat
Empty liquid left in the drum, into the trough. Repeat every 6 weeks for year-round products, or as directed on the drum label. MagBoost, for example, is dosed every 3 weeks through the risk window.
How the ProDispenser works
As product flows out, an equal amount of water is drawn into the drum. That air and water pressure keeps the drum weighted and the release steady, with no pumps, power or moving parts. It is also why the air space matters: without it, the ProDispenser can’t meter correctly.
Warm water speeds the release up, and cold or hard water slows it down. The light, tea-coloured liquid left in the drum at the end is normal.
Approximate maximum fill per drum
| Drum | Maximum fill |
|---|---|
| 20L drum | 18L total liquid |
| 10L drum | 8L total liquid |
| 5L drum | 4L total liquid |
Do
- Measure the dose first into a clean, empty DosingDrum.
- Leave approx. 20% air space.
- Let the drum float and move freely in the trough.
- Add water to small doses for extra weight.
- Start with clean trough water where possible.
Don’t
- Attach the ProDispenser to a full drum of product.
- Fill the drum to the top.
- Mix with other products in the water supply, including urea.
- Leave the ProDispenser in the trough longer than needed.
Scientifically proven delivery system
Adelaide University trial results demonstrate the effectiveness of our water-based delivery method, with nutritional levels maintained throughout the six-week period. That means less frequent supplementation, saving you time and money, with less handling, better animal welfare and a more sustainable approach to supplementation.
Troubleshooting and care
The stainless steel ProDispenser is built tough and every unit is checked before dispatch. With correct setup and basic care, it will give reliable service for many seasons.
Troubleshooting
The ProDispenser is not dispensing
- Check the trough water is clean and free of debris.
- Confirm 20% air space has been left in the drum.
- Very hard or cold water may slow flow slightly, so leave the drum in for an extra day.
- Very hot conditions can speed up the flow.
Dispensing seems slower than expected
- Water quality and temperature can affect flow rate.
- Ensure the drum can move freely in the trough.
- Check for sediment around the dispenser ports.
Drum emptying too quickly in hot weather or on a small dose
- Add extra water to provide weight and reduce pressure.
- Confirm the drum has not been overfilled.
- Ensure the ProDispenser has not been attached to a full drum of concentrate.
Cleaning instructions
General cleaning
- Wash the ProDispenser in hot water.
- Blow out the two ports (grub screws) with an air compressor.
- For calcium build-up, dip the head of the dispenser in CLR and rinse thoroughly.
- Avoid leaving the ProDispenser in the trough for long periods to minimise build-up.
Clearing a blockage
- Remove the two grub screws with the correct Allen key.
- Blow through the dispenser with compressed air to clear debris.
- The grub screws are different sizes and must be returned to their original positions.
Frequently asked questions
Can the ProDispenser be used with other company products?
The ProDispenser is purpose-built for LivestockIQ supplements and calibrated to suit our fine-sieved formulations. We cannot recommend or guarantee its performance with products from other manufacturers, and prior use with other products may affect dispensing accuracy when returning to a LivestockIQ supplement.
How often do I repeat the dose?
For year-round products, repeat every 6 weeks. Key time-of-use products vary: MagBoost, for example, is dosed every 3 weeks through the grass tetany risk window, and StressGuard is dosed ahead of each stress event. Always follow the dose guidelines on the drum.
No ProDispenser, or a shorter dosing window?
Divide the dose evenly and apply it manually over the dosing window. Example: 12L over two days = 2L morning, noon and night each day.